QIS ACRIMAX-UV
ACRI-MAX is a one-component, water-based, UV-resistant elastomeric coating that waterproofs cement-based structures and provides chemical resistance.
QIS ACRIMAX UV
Elastomeric Resin-Based, UV Resistant Waterproofing Coating
QIS ACRIMAX UV is an acrylic, elastomeric resin-based, single-component, water-based, UV resistant, elastic waterproofing coating — jointless, seamless, and flexible enough to bridge micro-cracks in the structure beneath it.
- All cement-based screed & plaster
- Indoor and outdoor use
- Terraces and roofs
- Exterior building facades
- Vertical and horizontal surfaces
- Concrete, zinc & precast surfaces
Application & Performance
How It's Applied
Surfaces must be clean, dry, and free of oil or curing residue before application, primed with QIS PRIM 100 and left to dry at least 1 hour. The coating is mixed at 400-600 rpm and applied in at least 2 coats by brush, roller, or airless spray — each coat applied perpendicular to the last, with the second coat following 3-6 hours after the first.
- Coats Required2 minimum
- Max Thickness / Coat1.5 mm
- Consumption500-750 g/m² per coat
- Packaging20 kg bucket
Technical Data
Tested and rated for continuous outdoor exposure — resistant to freeze-thaw cycling, UV degradation, and over 250% elongation to absorb structural movement without cracking.
- Material StructureWater-based Acrylic Resin
- Density1.40 ± 0.02 kg/lt
- Service Temperature-20°C to +80°C
- Flexibility> 250%
- Crack Bridging≥ 2 mm (EN 14891)
- Adhesion Strength≥ 1 N/mm² (EN 14891)